Comtroll R100C

Technical specifications

Application: Communication module for earth fault and short circuit fault indicators for underground cable networks.
Communication: Built in GSM module. GPRS connection with SMS as backup-channel.
GSM module 4G with 2G fallback.
Connects to NetTroll 4.1 TCP, or NetTroll SCADA Gateway for SCADA connection on DNP3 or IEC60870-5-104.
Functions: The GSM module is normally switched OFF when no alarms to transmit.
Sets up a GPRS connection to transfer alarms upon changes on one of the digital or analog inputs. Active Low/Active High is configurable. Activation time of the digital inputs configurable in the range 100ms to 2.5s.
Sends Heartbeat message in configurable interval.
Possible to set up SMS recipients if GPRS fails or as a copy.
Polls the GSM network regular to check for incoming messages.
Three individual recipient telephone numbers for SMS, or IP address for mail GPRS connection point.
Test/reset push-buttons on the front panel.
Inputs: 4 general digital inputs, opto isolated inputs is optional.
2 general 12 bits analog inputs (4-20mA)
Relay output: Rated current: 5A
Rated voltage / max. switching voltage AC 240/400 VAC
Maximum breaking capacity AC 1250 VA
Power Supply: 2 x 3,6V Lithium batteries KBB-20 (replaceable)
External DC 9-30VDC, 1A max and 1x KBB-20 battery
Operational lifetime > 10 years (Dependent on activity and heartbeat intervals etc.)